International Standard ISO 9015-2:2016
Destructive tests on welds in metallic materials — Hardness testing —
Part 2:
Microhardness testing of welded joints
ISO 9015 consists of the following parts, under the general title Destructive tests on welds in metallic materials — Hardness testing:
— Part 1: Hardness test on arc welded joints
— Part 2: Microhardness testing of welded joints
Contents
Foreword
1 Scope
2 Normative references
3 Symbols and abbreviated terms
4 Principle
5 Preparation of test specimens
6 Test procedure
1 Rows of indentations (R)
6.2 Individual indentations (E)
7 Test results
8 Test report
A rows of hardness tests (R) on welded joints
Annex B (informative) Example of a test report for individual hardness tests (E) on welded joints
Bibliograph
1 Scope
This part of ISO 9015 specifies microhardness testing on transverse sections of welded joints of metallic materials with high hardness gradients. It covers Vickers hardness tests in accordance with ISO 6507-1, normally with test loads of 0,98 N to less than 49 N (HV 0,1 to less than HV 5).
NOTE Testing ensures that the highest and/or the lowest level of hardness of both parent materials (in the case of dissimilar materials both parent materials) and weld metal is determined.
This part of ISO 9015 is not applicable to hardness testing of welds with loads of 49,03 N and above, which is covered by ISO 9015-1.
This part of ISO 9015 is not applicable to Vickers hardness testing of resistance spot, projection and seam welds, which is covered by ISO 14271.
This part of ISO 9015 is not applicable to hardness testing of very narrow welds, e.g. those typicallyproduced by laser and electron beam welding (see ISO 22826).
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 6507-1, Metallic materials — Vickers hardness test — Part 1: Test method
在線閱讀 免費(fèi)下載